A PAM control method for a matrix converter based on a virtual AC/DC/AC conversion method

In this paper, a novel control method for a matrix converter is proposed. The proposed method is a PAM (Pulse Amplitude Modulation) control method based on a virtual AC/DC/AC conversion method. Output voltage amplitude is controlled by controlling a virtual DC link voltage with a virtual rectifier. Output frequency is controlled by a virtual inverter. First, the proposed method is explained. Next, the validity of the proposed method is confirmed through simulation and experiment using a 750‐W prototype matrix converter. Moreover, various characteristics of the proposed method and conventional virtual AC/DC/AC method are compared through experiment. As a result of the experiment, it has been understood that total harmonic distortion of output current and common‐mode voltage can be reduced compared with the case of using a conventional virtual AC/DC/AC conversion method. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 166(4): 88–96, 2009; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20601     

Adsorption properties of amphiphilic polyoxyalkylenated dimethylpolysiloxane derivatives on keratin

Adsorption properties of two types of dimethylpolysiloxane backbone derivatives, perfluoroalkyl polyoxyethylenated dimethylpolysiloxane (FPD) and polyoxyethylenated dimethylpolysiloxane (PD), onto keratin surfaces were investigated. Both polymers are amphiphilic, since they possess hydrophilic polyoxyethylene groups. FPD contains a perfluoroalkyl group that provides both water-and oil-repellent properties, whereas PD lacks these groups. Adsorption properties of these polymers onto keratin surfaces are considered a good index to evaluate these compounds as nonionics used in hair-coating agents, since keratin is a major component of hair. FPD was more likely to be adsorbed and less likely to be eliminated from the keratin surface than PD. Once FPD had been adsorbed onto the keratin surface, it was very slowly washed from the surface when it was immersed in stationary water, whereas PD polymers were quickly washed from the keratin surface. Even in running water, rapid elimination of FPD was not observed. The strong resistance to loss of FPD after washing with a large quantity of water may be due to the water-repellent nature of the perfluoroalkyl groups. As a comparison, FPD adsorption onto a glass surface was also investigated. The affinity to the glass surface was found to be less than to the keratin surface.     

A new recovery process of carbon dioxide from alkaline carbonate solution via electrodialysis

Bipolar membrane electrodialysis is applied to CO₂ recovery from alkaline carbonate solution. CO₂ in flue gas is captured by an alkaline hydroxide absorbing solution to form an alkaline carbonate solution. The captured CO₂ is recovered from the alkaline carbonate solution via bipolar membrane electrodialysis, and the alkaline solution is regenerated simultaneously. To reduce the power requirement for CO₂ recovery, this study considers optimal design and operation. Three membrane arrangements were compared, and the results indicate the membrane arrangement comprising a bipolar membrane and cation exchange membrane is the most energy saving. With further optimization of operation conditions, the minimum power requirement for CO₂ recovery was reduced to 2.1 MJ/kg‐CO₂ (or 2.1 GJ/t‐CO₂). © 2009 American Institute of Chemical Engineers AIChE J, 2009     

In situ time-resolved X-ray diffraction of tobermorite formation in autoclaved aerated concrete: Influence of silica source reactivity and Al addition

The hydrothermal formation of tobermorite during the processing of autoclaved aerated concrete was investigated by in situ X-ray diffraction (XRD) analysis. High-energy X-rays from a synchrotron radiation source in combination with a newly developed autoclave cell and a photon-counting pixel array detector were used.To investigate the effects of the silica source, reactive quartz from chert and less-reactive quartz from quartz sand were used as starting materials. The effect of Al addition on tobermorite formation was also studied. In all cases, C-S-H, hydroxylellestadite and katoite were clearly observed as intermediates.Acceleration of tobermorite formation by Al addition was clearly observed. However, Al addition did not affect the dissolution rate of quartz. Two pathways, via C-S-H and katoite, were also observed in the Al-containing system. These results suggest that the structure of initially formed C-S-H is important for the subsequent tobermorite formation reactions.     

Application of CO2 laser heating zone drawing and zone annealing to nylon 6 fibers

Nlon 6 fibers were zone drawn and zone annealed by using a continuous wave carbon dioxide laser to develop their mechanical properties. A laser‐heating zone drawing was carried out under a applied tension of 35.4 MPa at a power density of 9.65 W · cm^?2, and then the zone‐drawn fiber was annealed. A laser‐heating zone annealing was carried out in two steps at a power density of 9.65 W · cm^?2; the first step was carried out under 423 MPa and the second under 517 MPa. The treating temperature of the fiber heated by the CO₂ laser was measured by using an infrared thermographic camera equipped with a magnifying lens. The treating temperature at the zone drawing is 138°C, and those at the first and the second zone annealing are 121 and 125°C, respectively. The second laser‐heated zone‐annealed fiber has a birefringence of 65.2 × 10^?3, a degree of crystallinity of 54%, and a storage modulus of 21 GPa at 25°C. Wide‐angle X‐ray diffraction patterns for the laser‐heated zone‐drawn and the zone‐annealed fibers show (200) reflection and (002/202) doublet due to only an α form on the equator. The laser‐heated zone‐drawn fiber has a melting endotherm peaking at 216°C and a trace of shoulder on the higher temperature side of its peak, and the laser‐heated zone‐annealed fibers have a single melting endotherm peaking at 216°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1711–1716, 2002     

Ethanol production from raw starch by a recombinant yeast having saccharification and fermentation activities

In order to develop a method for converting raw starch into ethanol efficiently, direct fermentation of ozonized raw starch using a recombinant yeast was investigated. Ozonolysis was carried out as a pretreatment to convert raw starch into ethanol rapidly and efficiently, and then the effect of the ozone degradation conditions on the degree of polymerization and the amount of amylose in a raw starch was determined. Since the degree of polymerization was low and the amount of amylose was high, raw starch treated with an ozone concentration of 40 gm^?3 and an ozonation time of 30 min was the material chosen for alcohol fermentation. Though the recombinant yeast could not convert the untreated raw starch, it converted the soluble starch and the ozonized raw starch at a comparatively high yield into ethanol. About 56% of the ozonized raw starch decomposed, and the ethanol concentration obtained from the ozonized raw starch was markedly greater than that obtained from untreated raw starch. The dynamic behavior of cell growth, substrate degradation, and ethanol production was examined in a continuous culture under various dilution rates, and the optimal dilution rate, ie 0.15 h^?1, was determined for maximizing the ethanol productivity (amount of ethanol produced per unit time). © 2002 Society of Chemical Industry     

Prevaporation of water/alcohol mixtures through the PVA membranes containing cyclodextrin oligomer

Prevaporation through the PVA membrame containing β-cyclodextrin oligomer (PVA/CD membrane) was performed for the mixtures of water/ethanol, water/1-propanol, and water/2-propanol. At higher alcohol concentrations, the water selectivities were greatly increased by CD for all the mixtures, in the order of 2-propanol/water>1-propanol/water>ethanol/water. The water permeation rate was decreased by CD, and the alcohol permeation rate was decreased much more for each mixture. At lower alcohol concentrations, the water selectivity for 1-propanol/water was slightly increased by CD, and that for 2-propanol/water was scarcely affeted, whereas that for ethanol/water was greatly increased. The water permeation rate was increased by CD for each mixture, and the relative increases in the water rates for propanols/water were smaller than that for ethanol/water. The permeation rate of 1-propanol as well as that of ethanol was decreased by CD, but the rate of 2-propanol was was increased. These effects of CD can be explained in terms of the inclusion strength. © 1994 John Wiley & Sons, Inc.     

Isotactic polypropylene hollow microfibers prepared by CO2 laser‐thinning

An isotactic polypropylene hollow microfiber was continuously produced by using a carbon dioxide (CO₂) laser‐thinning method. To prepare the hollow microfiber continuously, the apparatus used for the thinning of the solid fiber was improved so that the laser can circularly irradiate to the hollow fiber. Original hollow fiber with an outside diameter (OD) of 450 μm and an internal diameter (ID) of 250 μm was spun by using a melt spinning machine with a specially designed spinneret to produce the hollow fiber. An as‐spun hollow fiber was laser‐heated under various conditions, and the OD and the ID decreased with increasing the winding speed. For example, when the hollow microfiber obtained by irradiating the CO₂ laser to the original hollow fiber supplied at 0.30 m min^?1 was wound up at 800 m min^?1, the obtained hollow microfiber had an OD of 6.3 μm and an ID of 2.2 μm. The draw ratio calculated from the supplying and the winding speeds was 2667‐fold. The hollow microfibers obtained under various conditions had the hollowness in the range of 20–30%. The wide‐angle X‐ray diffraction patterns of the hollow microfibers showed the existence of the highly oriented crystallites. Further, the OD and ID decreased, and the hollowness increased by drawing hollow microfiber obtained with the laser‐thinning. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2600–2607, 2006     

Dietary eritadenine-induced alteration of molecular species composition of phospholipids in rats

The effect of dietary eritadenine, a hypocholesterolemic compound found in the mushroomLentinus edodes, on the fatty acid and molecular species profiles of phosphatidylcholine (PC) and phosphatidylethanolamine (PE) in the plasma and liver microsomes was investigated in relation to the hypocholesterolemic action of the compound in rats. Animals were fed the control or eritadenine-supplemented (50 mg/kg diet) diet for 14 d. Eritadenine supplementation significantly decreased the plasma concentrations of cholesterol and phospholipids, but not triglycerides. The PC/PE ratio of liver microsomes, but not plasma, was also markedly decreased by eritadenine. Eritadenine supplementation was found to increase the proportion of 18:2n-6 and, inversely, to decrease the proportion of 20:4n-6 and 22:5n-6 in plasma PC and liver microsomal PC and PE, indicating that eritadenine depressed the metabolism of linoleic acid. The effect of eritadenine on the profile of n-3 fatty acids was dissimilar in PC and PE. These changes in fatty acid composition were selectively reflected in the molecular species composition of both PC and PE; the extent of increase in 16:0–18:2 molecular species or decrease in 18:0–20:4 molecular species was apparently greater than that of other molecular species containing 18:2 or 20:4 in the sn-2 position. These results suggest that, in addition to the decrease in liver microsomal PC/PE ratio, the alteration of plasma PC molecular species composition might also participate in the hypocholesterolemic action of eritadenine.     

Effects of administration of Bifidobacterium animalis subsp. lactis GCL2505 on defecation frequency and bifidobacterial microbiota composition in humans

The aim of this study was to evaluate the changes in endogenous bifidobacteria and administered Bifidobacterium animalis subsp. lactis (B. lactis) GCL2505 (GCL2505) in the intestine after administration of GCL2505 by means of a randomized, placebo-controlled double-blind, cross-over study. An increase in the number of total bifidobacteria (the sum of B. bifidum, B. breve, B. longum subsp. longum, B. adolescentis, B. anglatum, B. catenulatum, B. pseudocatenulatum, B. dentium, B. longum subsp. infantis and B. lactis) in the feces were observed after administration of GCL2505 using species- and subspecies-specific real-time polymerase chain reaction analysis. However, the number of endogenous bifidobacteria species (excluding B. lactis) remained unchanged. B. lactis also became the predominant bifidobacterial species. Taking into account the number of GCL2505 administered, the findings further suggested that GCL2505 proliferated in the intestine. In addition, the defecation frequency increased during GCL2505 administration compared with the placebo. Moreover, a single administration study (n=17) clearly demonstrated that GCL2505 successfully reached the intestine before proliferating at least 10-fold. This is the first report to show an increase in intestinal bifidobacteria, with no changes to the endogenous species, and improvements in constipation following proliferation of administered bifidobacteria.